Asphalt Roofing

15° Wire Collation
Zinc Plated
Plain Shank
Made in the USA
Series ID: CLWZPR10*

Due to popular demand, Maze now makes e.g. (electro-galvanized) coil roofing nails. These roofing nails are 100% made in the USA and meet the criteria of the "Buy American Act." Plain Shank.

15° Wire Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: CLWR10*

Finally – a great hot-dip galvanized coating – and the convenience of being able to use a pneumatic coil roofing nailer! Ideal for the quality application of Asphalt and Fiberglass Shingles, for blind-nailing Fiber Cement Siding, for attaching Backerboard, for nailing felt . . . and a myriad of other applications! Packed in convenient job packs of 3,600 nails. Plain shank. High wire weld collation. PROUDLY MADE IN THE U.S.A.!

15° Wire Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: CLWR10*A

Finally – a great hot-dip galvanized coating – and the convenience of being able to use a pneumatic coil roofing nailer! Ideal for the quality application of Asphalt and Fiberglass Shingles, blind-nailing Fiber Cement Siding, attaching Backerboard, nailing felt . . . and a myriad of other applications! Packed in convenient job packs of 3,600 nails. Ring shank. High wire weld collation. PROUDLY MADE IN THE U.S.A.!

15° Wire Collation
Stainless Steel Type 304
Ring Shank
Made in the USA
Series ID: CLWSSRFG*A

These ring shank nails are made from Type 304 stainless steel for rust protection. Wire weld collation.

Hand Drive
High-Tensile Aluminum Alloy
Ring Shank
Made in the USA
Series ID: AV*A

DRIVE-RITE®aluminum nails are used for applying vinyl siding. Large, flat head allows proper "hanging" of siding. Diamond point makes driving the nail easy and true. Ring shank provides maximum holding power. Also suitable for application of asphalt shingles.

Hand Drive
High-Tensile Aluminum Alloy
Plain Shank
Made in the USA
Series ID: AS*

DRIVE-RITE® aluminum nails for applying vinyl siding have large 3/8" flat heads and diamond points. These nails are made by our Independent Nail Division - which specializes in a wide variety of aluminum (Bullseye®) and non-ferrous nails. Shipped only in 1-lb. boxes, 25 per master.

Hand Drive
High-Tensile Aluminum Alloy
Plain Shank
Made in the USA
Series ID: AV*

DRIVE-RITE®aluminum nails are used for applying vinyl siding. Large, flat head allows proper "hanging" of siding. Diamond point makes driving the nail easy and true. Also suitable for application of asphalt shingles.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: R10*

Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Manufactured to meet federal spec. ASTM F1667 and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: R10*A

Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. Ring shank provides extra holding power, especially in high wind/hurricane areas. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Type 304 Stainless Steel Roofing Nails also available. Manufactured to meet federal spec. FFN-105-B and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Spiral Shank
Made in the USA
Series ID: R10*S

Designed for the secure application of asphalt and fiberglass shingles on new construction and re-roofing jobs. Spiral shank provides extra holding power, especially in high wind/hurricane areas. STORMGUARD® Double Hot-Dipped Zinc-Coating provides extra corrosion-resistance in sea coastal areas. Type 304 Stainless Steel Roofing Nails also available. Manufactured to meet federal spec. FFN-105-B and ASTM spec. A-153 for hot-dip zinc coating. Nails should be long enough to penetrate 3/4" into the wood deck lumber, or completely through plywood decking. All Maze Nails are 100% Made in the U.S.A. SIZES AND QUANTITIES COMMONLY USED On A New Roof – 1-1/4" - 320 nails per sq. or 1-3/4 lbs. Over An Old Roof – 1-3/4" - 320 nails per sq. or 2-1/4 lbs.

Hand Drive
Stainless Steel Type 304
Plain Shank
Made in the USA
Series ID: SSRFG*

These nails are made from highly corrosion-resistant Type 304 Stainless Steel for outstanding rust-protection. The strong steel shanks drive with great strength.

Hand Drive
Stainless Steel Type 304
Ring Shank
Made in the USA
Series ID: SSRFG*A

These nails are made from highly corrosion-resistant Type 304 Stainless Steel for outstanding rust-protection. The strong steel shanks drive with great strength. Ring shank provides additional holding power.

Hand Drive
Zinc Plated
Plain Shank
Made in the USA
Series ID: R10*ZP

Due to popular demand, Maze now makes e.g. (electro-galvanized) roofing nails. These roofing nails are 100% Made in the USA and meet the criteria of the "Buy American Act." Plain shank.