Treated Decking

0° Plastic COIL-ATED®
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: CL*148Z

These top-quality double hot-dip galvanized nails are designed for use in the popular multi-impact nailers by Max Tools. Great for special applications such as bridgework, decks, etc. where using a hand-driven nail is too difficult. LIFETIME WARRANTY! Designed to fit MAX CNV400 & CNV400A MULTI-IMPACT NAILERS

0° Plastic COIL-ATED®
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: CL*148AZ

These top-quality double hot-dip galvanized nails are designed for use in the popular multi-impact nailers by Max Tools. Great for special applications such as bridgework, decks, etc. where using a hand-driven nail is too difficult. LIFETIME WARRANTY! Designed to fit MAX CNV400 & CNV400A MULTI-IMPACT NAILERS

20° Stick Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: CT*148AZ

Great for Post Frame and Timber Frame Construction, Bridge Building, Heavy Duty Crating, and much more. The sharp ring shanks hold tight and resist pullout. These nails are specifically designed for use in the MAX HS 130 High Pressure PowerLite™ Tool and Bostitch BRT 130.

20° Stick Collation
Stainless Steel Type 304
Ring Shank
Made in the USA
Series ID: CXSS*

Popular for cedar, redwood, and fiber cement sidings. The ring shanks hold tighter than smooth nails, and the textured head holds paint and stain. Made from Type 304 Stainless Steel. Use Type 316 Stainless Steel Fasteners for the highest degree of corrosion-resistance in environments such as sea-coastal areas.

20° Stick Collation
Stainless Steel Type 316
Ring Shank
Made in the USA
Series ID: CXSS*316

Popular for cedar, redwood, and fiber cement sidings. The ring shanks hold tighter than smooth nails, and the textured head holds paint and stain. Type 316 Stainless Steel Nails provide the highest degree of corrosion resistance - especially in sea-coastal areas.

Hand Drive
Brite
Ring Shank
Made in the USA
Series ID: L36*A

These 1/4" diameter ring shank spikes give a higher nail count per pound than 3/8" spikes. The thinner diameter drives easier andhelps to reduce wood splits. Brite.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: XCOM*Z

Ideal for general construction, carpentry, and framing. Bright finish. Flat head and diamond point.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: T44*

These nails are made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Producers of treated lumber and many building codes specify hot-dip galvanized or stainless steel nails because they have a rust-free life expectancy comparable to that of the treated lumber. Maze STORMGUARD® “P.T.L.”® Nails are double dipped in molten zinc. Shipped in Standard 50-lb. or 25-lb. Bulk Cartons Unless Otherwise Specified. (6) 5-lb. boxes per master. (25) 1-lb. boxes per master.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: T44*A

These nails are made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Ring shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip galvanized or stainless steel nails because they have a rust-free life expectancy comparable to that of the treated lumber. Maze STORMGUARD® “P.T.L.”® Nails are double dipped in molten zinc. Shipped in Standard 50-lb. or 25-lb. Bulk Cartons Unless Otherwise Specified. (6) 5-lb. boxes per master. (25) 1-lb. boxes per master.

Hand Drive
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Spiral Shank
Made in the USA
Series ID: T44*S

These nails are made from stiffer stock steel so the shanks can be smaller in diameter to help reduce wood splitting without bending. Spiral shanks provide exceptional holding power. Producers of treated lumber and many building codes specify hot-dip galvanized or stainless steel nails because they have a rust-free life expectancy comparable to that of the treated lumber. Maze STORMGUARD® “P.T.L.”® Nails are double dipped in molten zinc. Shipped in Standard 50-lb. or 25-lb. Bulk Cartons Unless Otherwise Specified. (6) 5-lb. boxes per master. (25) 1-lb. boxes per master.

20° Stick Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Plain Shank
Made in the USA
Series ID: CT44*

PTL nails are the type of galvanized nails recommended by wood treaters - and will last far longer and look much better than cheap "galv." nails that rust soon after application. LIFETIME WARRANTY!

20° Stick Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Ring Shank
Made in the USA
Series ID: CT44*A

PTL nails are the type of galvanized nails recommended by wood treaters - and will last far longer and look much better than cheap "galv." nails that rust soon after application. Ring shank provides additional holding power. LIFETIME WARRANTY!

20° Stick Collation
STORMGUARD® Double Hot-Dip Galvanized - ASTM A153 Compliant
Spiral Shank
Made in the USA
Series ID: CT44*S

Heavy Duty Decking ("Trex") Nail The heavier gauge on these nails make them ideal for the new popular composite decking such as Trex®, Boardwalk®, ChoiceDek®, WeatherBest®, Nexwood®, etc. The manufacturers of these deck products recommend and specify hot-dip galvanized or stainless steel fasteners.

Hand Drive
Stainless Steel Type 304
Spiral Shank
Made in the USA
Series ID: SSDK*

These Screw-Down® nails hold tight on a wide variety of outdoor applications. Ideal for use on cedar & redwood decks where a durable nail is needed to drive into the pressure treated lumber joists. Textured head holds paint and stain. Manufactured from top-grade, Type 304 stainless steel.

Hand Drive
Stainless Steel Type 304
Ring Shank
Made in the USA
Series ID: XSST44*A

These Type 304 stainless steel post-frame ring shank nails are recommended for the application of preservative-treated skirtboards. They are also excellent for other applications in severely corrosive environments. (Note: For maximum protection, Type 316 stainless steel nails are available as the same part number but with a "316" suffix.)

Hand Drive
Stainless Steel Type 316
Ring Shank
Made in the USA
Series ID: XSST44*A316

Made from Type 316 stainless steel for ultimate corrosion-resistance. Recommended for the application of skirt boards treated with corrosive perservatives.